Help
Once in a while my sweep nurbs twist.....for example, I will create a curved spline and then the shape spline...can be a primitive shape or a custom shape....the nurb will have an unexpected twist in it at a bend...anyone have any input on this????????
Page 1 of 1
Sweep Nurbs Issue
#1
- Just Arrived
-
- Group: Poster
- Posts: 4
- Joined: 24-February 08
- Favorite Apps:Cinema 4D
- Machine Specs:Inspiron 6400
Posted 25 February 2008 - 12:08 AM
#2
- Site Admin
-
- Group: Admin
- Posts: 2,363
- Joined: 07-September 05
- Favorite Apps:Cinema 4D, Max, RealFlow, Terragen, Motionbuilder
- Location:London UK
- Machine Specs:I7 930 4.2 Ghz 12 GB Ram
Posted 25 February 2008 - 03:01 AM
Make sure the splines used for the shape are in order, try rotating the splines one by one
Go through the tick boxes and see if any help, parallel movement may be what you need
Go through the tick boxes and see if any help, parallel movement may be what you need
Share this topic:
Page 1 of 1